临安东诚防腐设备有限公司主营:浙江玻璃钢储罐、浙江玻璃钢防腐、杭州玻璃钢反应釜、浙江废气吸收塔、浙江废气处理设备、玻璃钢搅拌罐价格!
服务热线:186 5810 1028

新闻资讯 / NEWS

网站首页 > 新闻资讯
  • 玻璃钢储罐四大优势介绍
  • 本站编辑:临安东诚防腐设备有限公司发布日期:2019-12-21 19:09 浏览次数:

玻璃钢储罐是现在储存行业必备的罐体,其具有耐腐蚀、高强度、寿命长的特点,玻璃钢储罐四大优势介绍: 

  一、物理性能:玻璃钢储罐具有优良的物理性能,玻璃钢的比重通常为1.5~1.9g/cm3,是钢的1/4~1/5,比钢、铸铁和塑料的比强度都高,玻璃钢的热膨胀系数与钢大体相当,热传导系数只有钢的0.5%。

  二、耐化学腐蚀:玻璃钢储罐具有耐化学腐蚀性能:通过选用不同种类的树脂,可以耐各种酸、碱盐以及多种油类和溶剂,玻璃钢酸碱罐可广泛用于化工防腐的各个方面,可以代替不锈钢及部分贵重金属材料。

  三、再造型:玻璃钢储罐的再造型是非常强,玻璃钢储罐的主要原料是玻璃钢,其自身的性能可以改变。可以进行多层次的组合。玻璃钢整个形状都会发生很大的变化。整体的性能也是会改变的。所以很多人喜欢选择玻璃钢储罐。

  四、强度高:玻璃钢储罐的强度高,要比一些树脂强大很多倍,抗压能力是非常强大的。玻璃钢是由玻璃纤维和树脂组成的。一般来说的话,玻璃钢储罐的铺陈比例是7:1,所以这种铺陈方法能承受很大的单向压力。但如果是双向压力的话,我们的铺陈可以改变为双向的铺陈就可以了。当然,如果是对受力情况不清楚的话,可以选择多想铺陈方式。

  玻璃钢酸碱罐内壁光滑,糙系数n=0.0084,卫生性能好,易清洗,抗微生物腐蚀,如用食品级树脂为基体则无毒无味,可确保产品的卫生要求。 

Glass Fiber Reinforced Plastic (FRP) tank is the necessary tank body in the storage industry, which has the characteristics of corrosion resistance, high strength and long service life, the specific gravity of frp is usually 1.5 to 1.9 GCM3, which is 1 / 4 to 1 / 5 of that of steel. It has a higher specific strength than steel, cast iron and plastic. FRP has roughly the same Coefficient of thermal expansion as steel, and its heat conductivity is only 0.5% of that of steel. Chemical Corrosion Resistance: FRP TANKS HAVE CHEMICAL CORROSION RESISTANCE: through the selection of different types of resin, can be resistant to a variety of acids, Alkali Salts and a variety of oils and solvents, fRP ACID-BASE TANK can be widely used in all aspects of chemical anti-corrosion, can replace stainless steel and some precious metal materials. Re-molding: The re-molding of frp tanks is very strong, the main raw material of frp tanks is frp, its own performance can be changed. Can Be combined at many levels. The whole shape of fiberglass can change a lot. The overall performance can also change. So a lot of people like to choose fiberglass tanks. High Strength: FRP tanks are very strong, many times stronger than some resins, and are very strong in compression. Fiberglass is made of fiberglass and resin. In general, FRP tanks are laid out in a ratio of 7:1, so this method can withstand a lot of one-way pressure. But if it is a two-way pressure, our presentation can be changed into a two-way presentation on it. Of course, if the force is not clear, you can choose to think more about the presentation. The Glass Fiber Reinforced Plastic acid-alkali tank has smooth inner wall, roughness Coefficient n 0.0084, good hygiene performance, easy cleaning, anti-microbial corrosion, if using food grade resin as Matrix, it is non-toxic and tasteless, can ensure the hygiene requirement of the product.